Mostrando ítems 31-40 de 43
Hameed, Saqib (Fecha de defensa: 2017-09-22)
The thesis presented is performed with the aim of studying the effect of electropulses (EPs) in machining processes such as drilling and round turning processes for different materials. When the EPs of ...
Ordóñez Izquierdo, Víctor Hugo (Fecha de defensa: 2022-09-22)
Electromagnetic vibration energy harvesting is a relatively modern technology that has received relevant attention in the last decade from the research community and industry as a potential complement ...
Herranz Alvarez, Juan F. (Fecha de defensa: 2016-02-29)
The particle production of an accelerator is characterised by the accelerated species of particles, by their number and energy. The particle rate is determined by the production cross section, a natural ...
Torres Chamorro, Lisbeth Alejandra (Fecha de defensa: 2023-07-03)
(English This dissertation is an experimental assessment of the tool-part tribological interaction of continuous deformation processes: ball burnishing as a superfinishing process and wire drawing as a ...
Monshi Tousi, Navid (Fecha de defensa: 2023-06-16)
(English) The PhD focuses on the study of the flow around an airfoil at different Angles of Attack (AoA) with and without the implementation of Active Flow Control (AFC), while maintaining the Reynolds ...
Padilla Magaña, Jesús Fernando (Fecha de defensa: 2022-11-18)
(English) The Action Research Arm Test (ARAT) is a measurement tool to assess post-stroke upper extremities motor function. However, ARAT scoring can be subjective and limited only to determining ...
Adrover Monserrat, Bàrbara (Fecha de defensa: 2023-02-24)
(English) The mechanical characterization of new materials used in the Material Extrusion technique (MEX) in 3D printing is essential. The use of this technique is growing and with it the possible ...
Rodríguez Fernández, Antonio (Fecha de defensa: 2023-07-21)
(English) People with spinal cord injury (SCI) may suffer lifelong sequels that influence every aspect of their lives, including motor and/or sensory impairment, difficulty breathing and/or swallowing, ...
Loaiza Duque, Julián David (Fecha de defensa: 2023-10-27)
(English) The most common tremor disorders worldwide are Parkinson's Disease and Essential Tremor. The gold standard for diagnosing these movement disorders is medical evaluation by neurologists, but ...
Velázquez Corral, Eric (Fecha de defensa: 2023-09-05)
(English) This thesis is an experimental investigation into the beneficial effects of the ultrasonic vibration-assisted ball burnishing process on the wear resistance and fatigue life-cycle enhancement ...
621 - Ingeniería mecánica en general. Tecnología nuclear. Electrotecnia. Maquinaria (27)
531/534 - Mecánica. Vibraciones. Acústica (11)
620 - Ensayo de materiales. Materiales comerciales. Economía de la energía (5)
68 - Industrias, oficios y comercio de artículos acabados. Tecnología cibernética y automática (5)