Sousa Pais Antunes, Marcelo de (Date of defense: 2010-07-23)
En esta tesis doctoral se presenta la preparación y caracterización de espumas rígidas multifuncionales obtenidas a partir de compuestos y nanocompuestos en base polietileno (PE) y polipropileno (PP), ...
Martín Fuentes, E. (Enric) (Date of defense: 2007-09-13)
El aluminio y sus aleaciones son las matrices metálicas más utilizadas para la fabricación de materiales compuestos, debido a su baja densidad, capacidad de endurecimiento por precipitación, buena ...
Michiardi, Alexandra (Date of defense: 2006-02-24)
Desde que fueron descubiertas en el principio de los años sesenta, las aleaciones con memoria de forma de NiTi han suscitado un interés creciente. Hoy en día, estos materiales se emplean extensivamente ...
Baez Gaxiola, Martha Raquel (Date of defense: 2017-11-29)
The aim of the present thesis is to fabricate, to applicate, and to integrate nanomaterial-based chemical sensors with electrochemical transduction for the detection of water pollutants. This work is ...
Muñoz Tabares, José Alejandro (Date of defense: 2010-11-12)
The use of zirconia ceramics (ZrO2) as advanced structural materials is based on toughness increasing by tetragonal to monoclinic (tm) phase transformation. Of these, the 3Y-TZP (tetragonal polycrystalline ...
Ferrer Balas, Dídac (Date of defense: 2001-07-06)
En aquest treball, es presenta l'estudi de les propietats de fractura de films de polipropilè (PP) i copolímers etilè-propilè en blocs (EPBC) per mitjà de la tècnica del Treball Essencial de Fractura ...
Rodríguez Hernández, Ana Guadalupe (Date of defense: 2009-12-22)
La peri-implantitis puede poner en riesgo la integridad funcional de un implante dental, ya que dependiendo de la severidad del daño, éste puede ocasionar la pérdida irremediable del implante. Dicho ...
Punset Fuste, Miquel (Date of defense: 2018-05-04)
Material engineering has always played a defining role in industry by improving materials and tribological properties, increasing lite time use and thus ultimately reducing material costs. Over the ...
Casas Quesada, Casimir (Date of defense: 2015-01-21)
In this thesis, the microstructure and mechanical properties of bulk samples manufactured with nanocrystalline iron powder are analyzed. This iron powder was obtained by a severe plastic deformation ...
Ramírez Sandoval, Giselle (Date of defense: 2012-07-25)
In recent years hard coatings have acquired a significant importance in the microstructural and micromechanical design of forming tools. Among the wide range of surface modification techniques, physical ...
620 - Materials testing. Commercial materials. Power stations. Economics of energy (33)
66 - Chemical technology. Chemical and related industries (18)
62 - Engineering. Technology in general (6)
616.3 - Pathology of the digestive system. Complaints of the alimentary canal (2)
621 - Mechanical engineering in general. Nuclear technology. Electrical engineering. Machinery (2)