Ara mostrant els elements 12-31 de 78
Emara, Mohamed Reda Ali Elewa (Data de defensa: 2018-04-17)
The main objective of work has been to study the bond strength and bond-slip response of NSM CFRP strips in concrete when subjected to sustained loading under different environmental conditions. To this end, two experimental ...
Gómez Colom, Javier (Data de defensa: 2022-01-14)
The rehabilitation of civil structures has been gaining importance during the last decades. Owing to their mechanical, corrosion resistance and lightweight properties, Carbon Fibre-Reinforced Polymers (CFRP) present an ...
Vilanova Marco, Irene (Data de defensa: 2015-10-20)
In this work, a methodology has been developed to implement the bond behaviour between concrete and GFRP bars in the numerical modelling. Based on experimental results and applying the inverse method, the bond law to be ...
Arbeláez Toro, Juan José (Data de defensa: 2023-04-26)
In recent years, additive manufacturing technologies (3D printing) have been introduced in different fields, such as locomotion and bioengineering, among others. Extrusion by Fused Deposition Modeling (FDM) or Fused ...
Domingos, Marco (Data de defensa: 2013-10-04)
This research work proposes a novel automated and integrated system for the production and in vitro culture of scaffolds, called BioCell Printing. The main goal of the present research work, besides the development of the ...
Sebaey Abdella, Tamer Ali Abdella (Data de defensa: 2013-01-11)
The main objective of the thesis is to assess the damage resistance and damage tolerance of the non-conventional dispersed laminates and compare the response with the conventional ones. However, part of the effort is spent ...
Ortega Novillo, Adrián (Data de defensa: 2017-04-20)
When a fibre-reinforced composite laminate is subjected to traction or compression, it develops a relatively large Fracture Process Zone where material toughening mechanisms such as matrix cracking, ...
Abdel Monsef, Said Ahmed Ibrahim (Data de defensa: 2020-07-02)
Cohesive zone models are widely used for modelling delamination and bonded joints under different loading conditions. In the current thesis, an objective inverse method has been developed to extract the cohesive law from ...
Llobet Vallejo, Jordi (Data de defensa: 2020-01-17)
This thesis investigates the fatigue behaviour of fibre-reinforced composite laminates. Fatigue of composite materials is a complex subject both from an experimental and numerical modelling point of view. In this context, ...
Font Llagunes, Josep Maria (Data de defensa: 2007-06-14)
Aquesta tesi tracta el problema del posicionament de robots mòbils quan, en el decurs del moviment, es realitzen mesures angulars relatives al robot de l'orientació de la recta entre un dels seus punts i punts de l'entorn ...
Delgado Sanglas, Jordi (Data de defensa: 2013-06-25)
Selective laser melting process is an additive manufacturing technique that allows obtaining, from a 3D model, a physical model through a layer-by-layer manufacturing strategy. Several machines are commercially available, ...
Blanch Font, Robert (Data de defensa: 2012-03-01)
During the design phase, it creates and transforms ideas into products. It needs to know the manufacturing aspects for ensuring success and calculating the product cost while developing of designs. However, the choice one ...
Castellano i Costa, Jordi (Data de defensa: 2016-02-01)
El desarrollo de la sostenibilidad en la edificación ha realizado un gran avance en los últimos diez años, mejoras en la eficiencia energética de los edificios con la incorporación del certificado de eficiencia energética ...
Albertí Ibarz, Marta (Data de defensa: 2010-06-10)
La selección de centros de mecanizado de alta velocidad es un proceso complejo que requiere de mucha experiencia, puesto que en él intervienen un gran número de variables, tanto tecnológicas como económicas. Existen ...
Garcia-Romeu, Maria Luisa (Data de defensa: 2005-10-24)
Modelo de predicción de la geometría final de una pieza de chapa, radio y ángulo de doblado final, producida mediante un proceso de doblado al aire.
Ferrer Real, Inés (Data de defensa: 2007-04-23)
En el proceso de diseño se toman decisiones que pueden afectar a la fabricabilidad del producto. Cuando el diseñador es experto, considera las limitaciones, las propiedades y el coste de fabricación en la fase de materialización ...
Guerra Sánchez, Antonio (Data de defensa: 2019-06-06)
The main motivation of this work was to analyse the feasibility of the current stent’s manufacturing process to produce the new bioresorbable stents (BRS) as well as study new manufacturing methods. Fibre Laser Cutting ...
Teixidor Ezpeleta, Daniel (Data de defensa: 2013-10-17)
Nontraditional manufacturing processes (NTM) appeared to answer the growing demands of market productivity. Needs of higher quality products in less time and new demands such as new exotic work materials, innovative geometric ...
Vázquez Lepe, Elisa (Data de defensa: 2014-05-20)
The development of new products with micro-metric characteristics and complex geometries has been a manufacturing trend in different industrial sectors, particularly for electronic, military, biomedical and aerospace ...
Dorf, Tomasz (Data de defensa: 2019-06-05)
Polymeric materials, which are suitable for high performance applications for example human implants are one of the most expensive available polymers. Standard injection micromoulding process, dedicated for mass production, ...