Study on conduction mechanismes of mediun voltage cable XLPE insulation in the melting range of temperatures.

Author

Orrit Prat, Jordi

Director

Belana, Joan

Date of defense

2012-03-07

Legal Deposit

B. 24406-2012

Pages

199 p.



Department/Institute

Universitat Politècnica de Catalunya. Departament de Física Aplicada

Abstract

D’ençà que el polietilè reticulat (XLPE) es va començar a utilitzar com aïllament elèctric per cables de subministrament elèctric, s’han destinat molts esforços a l’estudi de les propietats dielèctriques del polietilè i l’efecte que la càrrega d’espai té sobre el seu comportament. En aquest sentit, les corrents de despolarització estimulades tèrmicament (TSDC) s’han utilitzat extensament per estudiar les relaxacions de càrrega d’espai. Aquesta tècnica ha demostrat tenir prou resolució per distingir diferències en aïllaments de XLPE amb composicions o processos de fabricació diferents. En aquesta tesi, els mecanismes de conducció dels aïllaments XLPE de cables de mitjana tensió (MV) han estat estudiats per TSDC i diverses tècniques complementàries, com l’anàlisi dinàmica elèctrica (DEA), les corrents d’absorció/resorció (ARC), el pols electroacústic (PEA) i les corrents de despolarització isotèrmiques (IDC). Altres tècniques, com l’espectroscòpia d’infrarojos (FTIR) o la difracció de raigs X, han estat també utilitzades per caracteritzar el material. S’han obtingut espectres TSDC per diferents mostres de cable, les quals en condicions de servei treballen en un rang de tensió AC de 12 a 20kV i a temperatures al voltant dels 90ºC. D’altra banda, s’han realitzat mesures de la conductivitat per ARC i DEA en mostres de cable, en cilindres de XLPE i en films. Les mesures s’han dut a terme a temperatures pertanyents al rang de fusió del XLPE (50–110ºC), en mostres sotmeses a aquestes temperatures durant diferents períodes de temps. Els resultats mostren diferències importants entre el comportament de les propietats conductives de les mostres de cable amb pantalles semiconductores (SC) i sense (cilindres de XLPE). El comportament observat ha estat explicat mitjançant la coexistència de dos mecanismes de conducció. La difusió d’impureses des de les pantalles SC determina el comportament d’una d’aquestes contribucions a mig i llarg termini. Els resultats obtinguts per FTIR són consistents amb aquest model. Respecte la microestructura, tant les mesures DSC com la difracció per raigs X mostren que existeixen processos de recristal•lització quan les mostres són sotmeses a temperatures ubicades dins del rang de fusió. Els electrets formats mitjançant el mètode de la polarització per finestres (WP) mostren una descàrrega TSDC amb un ample pic heteropolar en el rang de fusió, amb el màxim al voltant dels 105ºC. En treballs previs, aquest pic es va associar a la fusió de la fracció cristal•lina. Tanmateix, en lloc de decréixer quan la temperatura de polarització augmenta, el pic presenta una temperatura de polarització òptima al voltant de 90-95ºC. Aquest comportament ha estat explicat tenint en compte els processos de recristal•lització que es produeixen quan el material es polaritza isotèrmicament. Durant la recristal•lització, una nova fracció cristal•lina creix en un estat polaritzat degut el camp aplicat, i origina una corrent de despolarització quan es fon durant la mesura TSDC. Amb l’objectiu de determinar l’origen d’altres pics que apareixen en l’espectre TSDC del XLPE, s’han emprat les IDC com a tècnica complementària. Les corrents IDC obtingudes de mostres no tractades es poden representar com la combinació de dues contribucions diferenciades: un terme que és una funció potencial del temps i un d’exponencial. La segona relaxació es correspon amb un pic TSDC que apareix a 95ºC. D’aquesta manera s’ha pogut determinar l’origen dipolar del pic. Finalment, mitjançant la tècnica PEA s’ha obtingut la distribució de la càrrega d’espai en mostres polaritzades que havien estat sotmeses a diferents tractaments tèrmics. S’ha observat un comportament transitori tant per PEA com per TSDC. Tanmateix no s’ha pogut establir cap relació directa entre les descàrregues TSDC i mesures PEA. En conseqüència, s’ha proposat una explicació per les corbes TSDC que considera mecanismes que no són detectables en els perfils de càrrega obtinguts per PEA


Since cross-linked polyethylene (XLPE) started to be used as electrical insulation for power cables, much research has been focused on polyethylene dielectric properties and the effect of the space charge on its behavior. In this sense, thermally stimulated depolarization currents (TSDC) have been widely used to study space charge relaxation. This technique has proved to have enough resolution to determine differences in charge trapping properties among XLPE insulations with different composition and manufacturing processes. In this thesis work, the conduction mechanisms of medium voltage (MV) cable XLPE insulation have been studied by TSDC and several complementary techniques, such as dynamic electrical analysis (DEA), absorption/resorption currents (ARC), pulsed electroacoustic (PEA) and isothermal depolarization currents (IDC). Other techniques, like Fourier transform infrared (FTIR) spectroscopy or X-ray diffractometry, have been used to characterize the material. TSDC spectra have been obtained for different cable samples, which in service conditions work under AC voltages ranging from 12 to 20kV and at temperatures around 90ºC. On the other hand, conductivity measurements by ARC and DEA have been performed in cable samples and in XLPE cylinders, as well as XLPE films. Measurements have been carried out at temperatures within the melting temperature range of XLPE (50–110ºC) on samples annealed at such temperatures during several annealing times. Results show significant differences in the behavior of the conductive properties of XLPE cable samples with semiconducting (SC) screens and without them (XLPE cylinders). The observed behavior has been explained by the coexistence of two conduction mechanisms. Diffusion of impurities from SC screens determines the medium and long-term behavior of one of these contributions and, hence, of cable conductivity. FTIR results are consistent with this model. With respect to microstructure, DSC and X-ray diffractometry results show that recrystallization processes exist when samples are annealed in the melting range of temperatures. Electrets formed by means of the windowing polarization method (WP) showed a TSDC discharge with a wide heteropolar peak in the melting temperature range, and with the maximum at about 105ºC. This peak was associated with the melting of the crystalline fraction in previous works. However, in spite of decreasing with the temperature of polarization, an optimal polarization temperature around 90–95ºC is found. This behavior has been explained by taking into account recrystallization processes when the insulation is isothermally polarized. During recrystallization, the new crystalline fraction grows in a polarized state due to the applied electric field, and it causes the depolarization current when it melts during the TSDC measurement. Results obtained from different experiments are consistent with this assumption. With the aim to find out the origin of other TSDC peaks present in the spectrum of XLPE cable samples, IDC has been used as complementary technique. IDC currents obtained from as-received cable samples at temperatures close to service conditions can be considered as the combination of two different contributions: a power law current and a stretched exponential contribution. The last relaxation process has been successfully associated with with a TSDC peak found at 95ºC. By this way the dipolar origin of the peak has been determined. Finally, PEA measurements have provided the space charge distribution profiles of polarized samples with different annealings. A transient behavior has been observed in both PEA and TSDC measurements. However, no straightforward relation between TSDC discharges and space charge detected by PEA can be established. Therefore, an explanation for TSDC curves has been proposed, which considers mechanisms that are not noticeable in charge profiles obtained by PEA.

Keywords

Polietilè; Conductivitat; Aïllament XLPE; Cables elèctrics; Corrents de despolarització termoestimulades; Espectroscòpia dielèctrica; Polyethylene; Conductivity; Power cables; Thermally stimulated depolarization currents; Dielectric spectroscopy; Aislamiento XLPE; Cables eléctricos; Corrientes de despolarización termoestimuladas; Espectroscopía dieléctrica

Subjects

53 - Physics

Documents

TJOP1de1.pdf

6.090Mb

 

Rights

L'accés als continguts d'aquesta tesi queda condicionat a l'acceptació de les condicions d'ús establertes per la següent llicència Creative Commons: http://creativecommons.org/licenses/by-nc-nd/3.0/es/
L'accés als continguts d'aquesta tesi queda condicionat a l'acceptació de les condicions d'ús establertes per la següent llicència Creative Commons: http://creativecommons.org/licenses/by-nc-nd/3.0/es/

This item appears in the following Collection(s)