Providência, António Bernardo (Date of defense: 2012-07-26)
This PHD is about design as a tool of interaction based in information systems, allowing not only to understand the relationship of design with the user, as also, based on User Centered Design, to create ...
Trias Mansilla, Daniel (Date of defense: 2005-04-18)
La present tesi proposa una metodología per a la simulació probabilística de la fallada de la matriu en materials compòsits reforçats amb fibres de carboni, basant-se en l'anàlisi de la distribució ...
Teixidor Ezpeleta, Daniel (Date of defense: 2013-10-17)
Nontraditional manufacturing processes (NTM) appeared to answer the growing demands of market productivity. Needs of higher quality products in less time and new demands such as new exotic work materials, ...
Garcia-Romeu, Maria Luisa (Date of defense: 2005-10-24)
Modelo de predicción de la geometría final de una pieza de chapa, radio y ángulo de doblado final, producida mediante un proceso de doblado al aire.
Sarrado Molina, Carlos (Date of defense: 2015-06-11)
The present thesis aims at developing robust numerical and experimental methods for the simulation of composite adhesive joints. Firstly, a new method for the experimental characterization of adhesive ...
Albertí Ibarz, Marta (Date of defense: 2010-06-10)
La selección de centros de mecanizado de alta velocidad es un proceso complejo que requiere de mucha experiencia, puesto que en él intervienen un gran número de variables, tanto tecnológicas como ...
Llobet Vallejo, Jordi (Date of defense: 2020-01-17)
This thesis investigates the fatigue behaviour of fibre-reinforced composite laminates. Fatigue of composite materials is a complex subject both from an experimental and numerical modelling point of ...
Maimí Vert, Pere (Date of defense: 2007-04-27)
En el trabajo se definen modelos constitutivos que permiten reproducir el proceso de fallo de estructuras de materiales compuestos en distintas escalas bajo cargas estáticas. <br/>Se define un modelo ...
Delgado Sanglas, Jordi (Date of defense: 2013-06-25)
Selective laser melting process is an additive manufacturing technique that allows obtaining, from a 3D model, a physical model through a layer-by-layer manufacturing strategy. Several machines are ...
Guerrero Garcia, José Manuel (Date of defense: 2020-02-07)
In this thesis, a micromechanical model for predicting the tensile failure process in hybrid and non-hybrid unidirectional composite materials under fibre tensile loading is developed. Derived from this, ...