Ara mostrant els elements 1-10 de 41
Providência, António Bernardo (Data de defensa: 2012-07-26)
This PHD is about design as a tool of interaction based in information systems, allowing not only to understand the relationship of design with the user, as also, based on User Centered Design, to create ...
Trias Mansilla, Daniel (Data de defensa: 2005-04-18)
La present tesi proposa una metodología per a la simulació probabilística de la fallada de la matriu en materials compòsits reforçats amb fibres de carboni, basant-se en l'anàlisi de la distribució ...
Teixidor Ezpeleta, Daniel (Data de defensa: 2013-10-17)
Nontraditional manufacturing processes (NTM) appeared to answer the growing demands of market productivity. Needs of higher quality products in less time and new demands such as new exotic work materials, ...
Garcia-Romeu, Maria Luisa (Data de defensa: 2005-10-24)
Modelo de predicción de la geometría final de una pieza de chapa, radio y ángulo de doblado final, producida mediante un proceso de doblado al aire.
Sarrado Molina, Carlos (Data de defensa: 2015-06-11)
The present thesis aims at developing robust numerical and experimental methods for the simulation of composite adhesive joints. Firstly, a new method for the experimental characterization of adhesive ...
Albertí Ibarz, Marta (Data de defensa: 2010-06-10)
La selección de centros de mecanizado de alta velocidad es un proceso complejo que requiere de mucha experiencia, puesto que en él intervienen un gran número de variables, tanto tecnológicas como ...
Llobet Vallejo, Jordi (Data de defensa: 2020-01-17)
This thesis investigates the fatigue behaviour of fibre-reinforced composite laminates. Fatigue of composite materials is a complex subject both from an experimental and numerical modelling point of ...
Maimí Vert, Pere (Data de defensa: 2007-04-27)
En el trabajo se definen modelos constitutivos que permiten reproducir el proceso de fallo de estructuras de materiales compuestos en distintas escalas bajo cargas estáticas. <br/>Se define un modelo ...
Delgado Sanglas, Jordi (Data de defensa: 2013-06-25)
Selective laser melting process is an additive manufacturing technique that allows obtaining, from a 3D model, a physical model through a layer-by-layer manufacturing strategy. Several machines are ...
Guerrero Garcia, José Manuel (Data de defensa: 2020-02-07)
In this thesis, a micromechanical model for predicting the tensile failure process in hybrid and non-hybrid unidirectional composite materials under fibre tensile loading is developed. Derived from this, ...