Mostrando ítems 21-30 de 52
Jahani, Younes (Fecha de defensa: 2022-11-11)
There is a general trend towards rehabilitation and strengthening of existing reinforced concrete (RC) structures due to the costs associated with the replacement of the structural members and the ...
Carreras Blasco, Laura (Fecha de defensa: 2019-07-17)
The overall purpose of this Ph.D. thesis is to contribute to the reliable design of composite structures subjected to fatigue-driven delamination. The aim is motivated by a wish to reduce the amount of ...
Budhe, Sandip Rudha (Fecha de defensa: 2014-07-24)
In recent years, the use of composite materials in the aeronautic, automotive, marine construction, etc. has increased significantly. Hence, there is an increasing need for repair technologies on primary ...
Quintanas Corominas, Adrià (Fecha de defensa: 2019-10-11)
his doctoral thesis aims at developing and implementing a computational framework for performing virtual testing of composite structures using a High-Performance Computing (HPC) environment. In this ...
Dorf, Tomasz (Fecha de defensa: 2019-06-05)
Polymeric materials, which are suitable for high performance applications for example human implants are one of the most expensive available polymers. Standard injection micromoulding process, dedicated ...
Ximinis Tarrés, Joan (Fecha de defensa: 2022-09-07)
First part of this research is focused in validating the Exhaust Gas Heater (EGH) viability in reducing NOx emissions without negative effects in a standard exhaust gas circuit. Experimentation was held ...
Turon Travesa, Albert (Fecha de defensa: 2006-12-18)
Es desenvolupa una eina de disseny per l'anàlisi de la tolerància al dany en composites. L'eina pot predir el inici i la propagació de fisures interlaminars. També pot ser utilitzada per avaluar i ...
Guerra Sánchez, Antonio (Fecha de defensa: 2019-06-06)
The main motivation of this work was to analyse the feasibility of the current stent’s manufacturing process to produce the new bioresorbable stents (BRS) as well as study new manufacturing methods. ...
Baena Muñoz, Marta (Fecha de defensa: 2011-02-14)
El uso de barras de materiales compuestos (FRP) se propone como una alternativa efectiva para las tradicionales estructuras de hormigón armadas con acero que sufren corrosión en ambientes agresivos. La ...
Massaguer Colomer, Eduard (Fecha de defensa: 2016-07-26)
In this work, we investigate harvesting thermoelectric energy from wasted heat in fluid networks and propose a generic tool for the simulation and sizing of thermoelectric energy harvesters, that can ...
621 - Ingeniería mecánica en general. Tecnología nuclear. Electrotecnia. Maquinaria (28)
620 - Ensayo de materiales. Materiales comerciales. Economía de la energía (23)
62 - Ingeniería. Tecnología (6)
624 - Ingeniería civil y de la construcción en general (6)